Commercial Hood System: Exhaust Only with Perforated Supply Plenum

MULTIPLE HOOD OPTIONS ARE AVAILABLE UPON REQUEST

Hood shall be standard straight exhaust only type. Make-up air shall be introduced through an optional (FPSP) Front Perforated Supply Plenum with internal balancing plate and stainless steel perforated bottom panel. Mounting brackets shall be located on each end of the plenum. The hood shall be fabricated from Type 430 stainless steel with #3 or #4 polish on all exposed surfaces.

Hood shall be of double wall construction with seams and joints welded and sealed liquid tight, to conform to NFPA 96. Comers of hood shall be trimmed to give the hood a straight, crisp appearance free of warps. 12 gauge hanging brackets for hood shall be located on each comer (more brackets as needed for longer hoods.) Grease fitters shall be UL classified, non-clogging, baffle type. Fitter size and quantity to extend the full length of hood and shall be easily removable for cleaning purposes.

All exhaust plenum surf aces and filters shall drain into a removable grease trough and be conveyed to a removable grease container for easy cleaning. Incandescent lights shall be installed at approximately 3′ intervals and shall be UL listed for use in exhaust hoods and allow up to a 100 Watt standard light bulb. Lights shall be completely pre-wired to a junction box located on top of the hood. Exhaust collar shall have a 3/4″ welding flange for easy field connection. Supply collar shall be provided.